USING THE 4213 MENUSThe lower level paper size selections for the bypass slot and theadjustable tray are listed below as they appear in the messagedisplay:ADJUSTABLE ALETTER* (8 X 10, EXECUTIVE, 215 X 275, LETTER, A4, 215 X315, 210 X 330, 8 X 13, 8.5 X 13 or LEGAL)ADJUSTABLE BLETTER* (8 X 10, EXECUTIVE, 215 X 275, LETTER, A4, 215 X315, 210 X 330, 8 X 13, 8.5 X 13 or LEGAL)BYPASSB4* (8 X 10, EXECUTIVE, 215 X 275, LETTER, A4, 215 X 315,210 X 330, 8 X 13, 8.5 X 13, LEGAL or B4)Configuration SheetThe Configuration Sheet lists all the system and default emulationconfiguration variables. This menu item allows you to choosewhether or not you automatically receive the Configuration Sheeteach time the printer is switched on, and whether you want toenable the Power Saver Mode.The Configuration Sheet menu item options are listed below asthey appear in the message display:CONFIG SHEETPWR ON DISABLED* (PWR ON DISABLED or PWR ONENABLED)The 4213 enters into the power saver mode if this feature isenabled (PWR ON ENABLED), and the 4213 has been inactive fora length of time equal to or greater than 2 hours and 8 minutes.The following message then appears in the message display:POWER SAVER ONThe 4213 leaves the Power Saver mode for any 1 of thefollowing:• a page is ready to be printed• an emulation switch command has been received via the datastream, or• a door on the printer has been opened and closed.XEROX 4213 LASER PRINTER USER GUIDE 3-9
