XEROX COAX/TWINAX OPTIONSaving user defaultsYou must use the SAVE DEFAULTS option to save any changesmade to the printer configuration settings if you wish thesesettings to be permanent and active each time the system isswitched on. Otherwise, when your system is switched off andthen on again, the configuration returns to the configuration thatwas previously saved.You must exit the Main Menu and access the Reset Menu to saveyour selections as the Coax or Twinax configuration defaults.1. There are two ways to exit the Main Menu:A • Press the Menu button until OFF LINE appears in themessage display.orH • Press the Online button. The printer is online. Thegreen online indicator light is lit.H • Press the Online button again to take the printer off line.The green online indicator light is not lit.Note: Do not use this way of exiting the Main Menu afterchanging the option settings for the IBM Comms menus. This isbecause if you put the printer back online, you will lose all thenew option settings except for those associated with the IBMCommunications.Use the following buttons to save your selections as the IBMTwinax default configuration:G 2. Press the Reset button to access the Reset Menu. Thedisplay reads:RESET MENUEMULATION RESETC 3. Press the Last Page button until the display reads:RESET MENUSAVE DEFAULTSXEROX 4213 LASER PRINTER USER GUIDE A3-79
