XEROX COAX/TWINAX OPTION4. Font information shows how the IBM Global FontIdentification (GFID) numbers relate to Xerox font names.The default font selected by the GFID algorithm is bolded.Review the information listed on the configuration sheet todetermine if the current settings are satisfactory.Notes • The font information does not tell you what fonts areavailable in the 4213 itself.• To check the fonts available in the 4213 you will need toprint an XES Font Status Sheet.• The language option on the configuration sheet will beshown also as “N/A” (not applicable) when the XCTO isoperating in its EBCDIC mode.Printing the currently selected translate tablesFollow steps for “Printing a Twinax configuration sheet” until thedisplay reads IBM UTILITIES/PRINT CONFIG, Now press the LastPage C button and the display reads IBM UTILITIES/PRINT TABLE.Next press the Test B button and PRINT TABLE/DISABLES*displays. Press the Last Page C button and PRINTTABLE/ENABLED displays. Press the Select D button to enableprinting of the translate tables. Press the Online H button to putthe printer back online and the currently selected tables will beprinted. Figures A3-21 to A3-23 shows sample Twinax TranslateTables.XEROX 4213 LASER PRINTER USER GUIDE A3-71
