ADJUSTABLE TRAYUsing the control panel to identify the paper size of an adjustable trayThe image sent to the printer is placed on the page according tothe size of the paper being fed.You can identify the adjustable tray as a type A Tray or a type BTray. (Refer to step 7 in “Loading paper in the adjustable tray.”)Once identified, use the control panel to select the paper size ofthe identified tray. The printer can then place the image in thecorrect location on the paper.Before submitting your print job, use the following buttons onthe control panel to access the Main Menu and to specify thepage size or sizes for your adjustable tray.H 1. Press the Online button to take the printer off line. (Thegreen online indicator light is not lit.)A 2. Press the Menu button to access the Main Menu. Thedisplay reads:MAIN MENUPRINTER LANGUAGEC 3. Press the Last Page button until the display reads:MAIN MENUADJ PAPER SIZEB 4. Press the Test button to display the adjusted paper sizeheadings. The display reads:ADJ PAPER SIZEADJUSTABLE AC Note: If you wish to use an adjustable tray which is identified astype B Tray, press the Last Page button to display ADJUSTABLE B.B 5. Press the Test button to display the lower level adjustabletray page size options. The display reads the current sizeselected, such as:ADJUSTABLE A8 X 10orADJUSTABLE B8 X 10XEROX 4213 LASER PRINTER USER GUIDE A1-7
