USING THE 4213 MENUSD • Use the Select button before you initiate changes to numericentries, such as, COPIES, FONT SELECT, and OVERRIDEFORMAT MARGINS.A • Use the Menu button to move to the next higher menulevel. (If pressed continuously, you exit the Main Menu andthe printer is in the off line mode.)D • Use the Select button to select a displayed option. When anoption is selected, an asterisk (*) appears next to the optionin the display.D Note: The asterisk does not appear when Select is pressedto select numeric entries, such as, COPIES, FONT SELECT,and OVERRIDE FORMAT MARGINS.7. Use either one of the following buttons to exit the menu:A • Use the Menu button repeatedly, until you exit the MainMenu. The printer is in the off line mode. The onlineindicator light is not lit.H • Use the Online button to exit the menu. The printer is inthe online mode. The online indicator light is lit.Note: You must access the Reset Menu to save your selectedoptions if you want to keep the current default setting andemulation each time the printer is switched on.Saving the XES emulation configurationYou must exit the Main Menu and access the Reset Menu to saveyour selections as the default configuration for the XESemulation.1. There are two ways to exit the Main Menu:A • Press the Menu button until OFF LINE appears in themessage display.orH • Press the Online button. The printer is online. (Thegreen online indicator light is lit.)H Press the Online button again to take the printer off line.(The green online indicator light is not lit.)XEROX 4213 LASER PRINTER USER GUIDE 3-21
