CARE AND MAINTENANCE3. Close the top cover by pushing it down until it latches intoplace and is flush with the cover.Cleaning the printerWhen the printer exterior becomes dirty, clean it, and keep thefollowing points in mind:WARNING: The power to the printer should be off beforecleaning the printer. The power switch should be in the “O”position.• Use a soft dry cloth to remove dust and dirt on the outersurface of the printer. If dirt is hard to wipe off with a drycloth, clean it with a cloth slightly moistened with water.Ensure the cloth is not dripping wet.• Be careful not to get water inside the printer.• Never use alcohol or thinner.5-64 XEROX 4213 LASER PRINTER USER GUIDE
