POSTSCRIPT EMULATIONChange the printer emulationYou must change the printer emulation to PostScript in order touse the PDL option. Refer to the following steps.1. Turn on the printer. The message display reads:READYH 2. At the printer control panel, press the Online button to takethe printer off line. (The green online indicator light is notlit.)A 3. Press and release the Menu button to display the first MainMenu heading in the top level menu. The display reads:MAIN MENUPRINTER LANGUAGEC 4. Press the Last Page button until the display reads:MAIN MENUEMULATIONB 5. Press the Test button. The display reads:EMULATIONXESC 6. Press the Last Page button until the display reads:EMULATIONPSD 7. Press the Select button to select PostScript as the emulationoption.H 8. Press the Online button to put the printer back online. (Thegreen online indicator light is lit.)For detailed instructions on printing, refer to chapter 4, “Printingwith the 4213.”A4-12 XEROX 4213 LASER PRINTER USER GUIDE
