USING THE 4213 MENUSChanging the LJ2D emulation configuration at the Main MenuThe emulation submenus list configuration options for theresident emulations. All of the printer emulations may beselected through the Main Menu and then set up individually toconform to your printing needs.This section shows which buttons on the control panel are usedfor accessing the Main Menu, advancing to display the emulation,and, if applicable, selecting emulation configuration options.If necessary, refer to “Control panel,” in chapter 2, “Overview,”for a diagram showing the location of the control panel buttons.Accessing the Main Menu and selecting LJ2DUse the following buttons at the printer control panel:H 1. Press the Online button to take the printer off line. (Thegreen online indicator light is not lit.)A 2. Immediately press and release the Menu button to displaythe first Main Menu heading in the top level menu. Thedisplay reads:MAIN MENUPRINTER LANGUAGEC 3. Press the Last Page button. The display reads:MAIN MENUEMULATIONB 4. Press the Test button. The display reads:EMULATIONXES*C 5. Press the Last Page button to display LJ2D.D 6. Press the Select button to select LJ2D. An asterisk appearsnext to your selection.XEROX 4213 LASER PRINTER USER GUIDE 3-33
