POSTSCRIPT EMULATIONNote: To enable the Error Handler menu item option, youshould go into PostScript submenu from the UI to the ErrorHandler selection. The default is OFF. You can select ON; thefeature is not enabled until power is recycled or you can exitcurrent emulation to another emulation and re-enter PostScriptemulation.Changing the PostScript configuration at the Main MenuThe PostScript sub-menus list the configuration options. Theconfiguration sub-menu is selected through the Main Menu andthen set up individually to conform to your printing needs.This section shows which buttons on the control panel are usedfor accessing the Main Menu, advancing to display the PostScriptemulation, and if applicable, selecting emulation configurationoptions.If necessary, refer to “Control panel,” in chapter 2, “4213Overview,” for a diagram showing the location of the controlpanel buttons.Accessing the Main Menu and selecting PostScriptSelect the PostScript option from the Emulation Menu, and makeany emulation configuration changes required.Saving the POSTSCRIPT emulation configurationWhen you have made your selections, use the following buttonsto save them as the emulation configuration defaults:H 1. Press the Online button to take the printer off line. (Thegreen online indicator light is not lit.)G 2. Press the Reset button to access the Reset Menu. Thedisplay reads:RESET MENUEMULATION RESETC 3. Press the Last Page button until the display reads:RESET MENUSAVE DEFAULTSXEROX 4213 LASER PRINTER USER GUIDE A4-23
