INSTALLATION6. Place the filled paper tray all the way into the empty trayslot. Make sure the end of the paper tray with the snubbersgo in first. Push it gently into position until it clicks intoplace.Note: Make sure that the paper tray is correctly seated.When the paper tray is not completely and correctlyinserted, the configuration sheet may display an incorrecttray code which can cause a problem in your print job.Print a configuration sheetThe yellow Warning indicator light is no longer lit after the papertrays are installed. The message display shows that the printer isonline and ready to accept data sent from your computer. Thegreen online indicator light is lit. The Xerox Escape Sequences(XES) printer command is the default printer emulation at powerup.Note: Refer to the “Using the 4213 Menus” chapter if yourapplications require a different default printer emulation.To review the configuration settings in place for the printer andthe XES emulation, you should print a Configuration Sheet.To print the Configuration Sheet, press and release the followingbuttons in the sequence shown:H 1. Online takes the printer off line (the green online indicatorlight is not lit).B 2. Test accesses the Test Menu.D 3. Select prints the Configuration Sheet.H 4. Online puts the printer back online (the green onlineindicator light is lit).1-20 XEROX 4213 LASER PRINTER USER GUIDE
