Configuring the NBX Attendant Console 157To change the name of an extension:1 Select NBX NetSet > Device Configuration > Call Park.2 Select the extension name that you want to change. Click Modify. TheModify Call Park dialog box appears. Click the Help button to see moreinformation about the dialog box fields.3 Enter the new name for the Call Park extension in the Name field.4 Click OK.Removing a Call ParkExtensionYou can remove a Call Park extension at any time.To remove a Call Park extension:1 Select NBX NetSet > Device Configuration > Call Park.2 Select the extension that you want to remove.3 Click Remove. You are prompted to confirm that you want to remove thisextension.4 Click Yes.To replace any extension that you remove, see “Adding a Call ParkExtension” on page 156.Configuring theNBX AttendantConsoleThe NBX Attendant Console provides extended button mappings anddisplays the current status of each extension mapped to it. A receptionisttypically uses the Attendant Console to connect incoming calls totelephone extensions.This section describes how to configure the Attendant Console manually.Alternatively, you can use Auto Discovery to add and configure the deviceautomatically, and then use the manual configuration procedures in thissection to fine-tune your mappings.If you auto discover the Attendant Console, do so after you have autodiscovered all telephones, Analog Terminal Adapters, and AnalogTerminal Cards. The Auto Discovery process maps all existing telephonesto the Attendant Console.This section covers these topics:■ Adding an Attendant Console
