262 CHAPTER 5: S YSTEM CONFIGURATIONRegional Settings After you install regional software and components from the regionalpacks, you can enable regional settings. To enable these regional settingsin NBX NetSet, you select the appropriate country and language for thesystem voice prompts, the technical tones and cadences, and the onlineuser documentation.To enable regional settings, select System Configuration > SystemSettings > Regional Settings. See the Help for the procedure on enablingregional settings.See “Regional Software” on page 347 for information on installingregional language packs.Advanced Regional SettingsThe NBX system also allows you to choose different regional settings forthe system voice prompts, the technical tones and cadences, and theonline user (not administrator) documentation. For example, you mayrequire local tones and cadences but may want the documentation to bein English and the voice prompts in Australian English.You can select separate regional settings for:■ Voice prompts — The Auto Attendant voice prompts.■ Documentation — The NBX Telephone Guide, the NBX NetSet userHelp, the LabelMaker utility, and the quick reference cards.■ Tones and Cadences — The tones and the patterns of rings (cadence)versus silence. Tones and cadences vary from country to country.Examples:■ United States ringing cadence (pattern) is 2 seconds of ringfollowed by 4 seconds of silence.■ United Kingdom ringing cadence is 2 rings within approximately 2seconds followed by 2 seconds of silence.■ United States busy tone is 0.75 seconds of tone followed by 0.75seconds of silence.To enable different regional settings:1 Log on to the NBX NetSet utility using the administrator login ID andpassword.2 Click System Configuration > System Settings > Regional Settings >Advanced. See the Help for procedures on selecting regional settings.
