306 CHAPTER 7: NBX M ESSAGINGStatus To view the status of all voice mail ports on your NBX system, click theStatus button.In the status window, to reset a voice mail port, select it and click Reset.Table 53 explains the information in the Status window.Table 52 Systemwide Settings FieldsField PurposeEnabled Check the box to enable Off-site Notification throughout thesystem. By default, Off-site Notification is disabled.If you select Enabled, you must also enable Off-siteNotification in these locations:■ Class of Service Settings. See “Configuring Class ofService” in Chapter 4.■ User’s personal settings. See “Off-Site Notification” in theNBX Telephone Guide.Max Out-calling Ports The number of voice mail ports available for simultaneoususe by Off-site Notification. This parameter can beconfigured up to the number of voice mail ports licensed forthe NBX system. The system ships with 4 ports; you mustpurchase an upgrade license to enable additional ports.Out-dialing Prefix A prefix used by every call made by Off-Site Notification.If this setting is empty, the call uses only the informationspecified by the user.Table 53 Fields in the Status WindowColumn PurposeExt. The extension associated with the voice mail port.Name The name associated with the voice mail port.Used By The person or device that is using the voice mail port.Values:■ Extension number, name — An internal user is using thevoice mail port. The user’s extension number and nameappear in this column.■ Auto Attendant — The automated attendant is using theport.■ Blank — The port is not being used. The word Idleappears in the In Use column.
