Configuring and Managing Analog Line Card Ports 161To set Attendant Console Feature IP settings:1 Select NBX NetSet > Device Configuration > Attendant Console.2 Select the Attendant Console you want, and click IP Settings.When you change IP Settings, all current calls through this device areterminated.Configuring andManagingAnalog Line CardPortsEach NBX Analog Line Card provides access for up to four local telephonelines into your NBX system. The Call Processor treats a line card port as anextension, so each line card port needs its own extension number.You use Auto Discovery to detect Line Card ports, and you define thestarting address for Auto Discovery of devices in the system dial plan. Fora 3-digit dial plan, the default starting address is 750; for a 4-digit dialplan, the default starting address is 7250. Auto Discovery assigns the firstunassigned number, starting at 750 (or 7250 for a 4-digit dial plan), tothe first Line Card port.You typically configure Line Cards during installation. See the NBXInstallation Guide for more information.If you remove a line card from the system, the port information remains inthe database. The extension numbers assigned to the four ports do notbecome available for reuse unless you use the NBX NetSet utility toremove the line card from the configuration database.This section covers these topics:■ Configuring a Line Card Port■ Modifying a Line Card Port■ Removing a Line Card Port■ Verifying Line Card Port Status■ Rebooting a Line Card Port■ Advanced SettingsConfiguring aLine Card PortWhen you configure a line card port, you can assign it as a member of aline pool.
