Configuring and Managing BRI-ST Digital Line Cards 181Viewing Digital Signal Processor StatusTo view DSP (Digital Signal Processor) details:1 Return to the Digital Line Cards tab.2 From the Select Device Type list, select T1/ISDN Board List and click Apply.3 Select the BRI card you want and click Status.4 In the Board Status dialog box, select a DSP from the DSP List and clickDetails. The DSP Status window appears.5 Click Close to close the DSP Status window.6 Click OK.Modifying IP Settingsfor a BRI CardYou can modify the IP settings for a Digital Line Card to meet changingrequirements.The card must be on the same subnetwork as the Call Processor tomodify IP settings using the NBX NetSet utility.To modify the IP settings of a BRI Digital Line Card:1 On the Digital Line Cards tab, from the Select Device Type drop-down list,select T1/ISDN Board List.2 Click Apply.3 Select the BRI card for which you want to change the IP settings.4 Click IP Settings.5 To assign IP addresses, enter the first address in the First IP Address field.The system sequentially adds the remaining addresses.To assign IP addresses one at a time per channel:1 In the Digital Line Card IP Settings dialog box, click Assign AddressesIndividually.2 Enter the desired IP addresses for the channels.3 Enter the mask number appropriate for your site in the Common SubnetMask field.4 Enter IP address for the Common Default Gateway.5 Click Apply.6 Click OK.7 In the Digital Line Card IP Settings dialog box dialog box, click OK.
