210 CHAPTER 3: D EVICE CONFIGURATION■ CALL — Call audio trafficOff — No audio traffic on the T1 link.Flashing — Audio traffic is present.■ CARD — Card Software StatusGreen — The card has finished downloading software from the NCPand all software processes have started successfully.Amber — A problem with one or more of the software processesrunning on the card. The card automatically reboots itself if it detectsa problem with any of its software processes.■ DSP — Reserved for future use■ NCP — Network Call ProcessorAmber — The card is trying to establish contact with an NCP.Green — The card has established contact with an NCP.■ LNK — Ethernet linkGreen — The 10/100 Uplink port is connected to a 10Mb or to a10/100 Mb hub or switch.Red — The 10/100 Uplink port is connected to a 100 Mb hub orswitch.Off — There is no connection to the 10/100 Uplink port.■ ACT— Ethernet activityRapid blink — Data is passing into or out of the T1 card through the10/100 Uplink port.Modifying a T1 Card These sections describes how to modify a T1 card that is already installedin the system.■ Modifying the T1 Card Name or Type■ Modifying a T1 Span■ Configuring Partial T1 Lines■ Modifying T1 Audio ControlsModifying the T1 Card Name or TypeYou can change the name of a Digital Line Card at any time. You can alsoset the type to T1 or ISDN PRI.
