Speed Dials 267When a user receives a maintenance alert message, the source of themessage depends on whether you have configured an NBX system useras the author of maintenance alert messages. See Table 38 for details.To set maintenance alerts:1 Log on to the NBX NetSet utility using the administrator login ID andpassword.2 Click System Configuration > System Settings > Maintenance Alerts. Seethe Help for procedures on setting the maintenance alert author andspecifying users to receive maintenance alerts.Speed Dials You can create up to 100 System Speed Dial numbers. You can alsocreate system speed dial and personal speed dial button definitions andassign them to groups. Do not confuse speed dial codes with extensionnumbers.Any telephone in a Telephone Group has access to the same buttondefinitions. Users can create personal speed dial definitions for buttonsthat do not already have a button mapping. Users can also changedefinitions for any buttons mapped as personal speed dial buttons, evenif those buttons are defined in the Group Button Mappings.System speed dial numbers are not subject to Class of Service (CoS)restrictions, so a speed dial number mapped to a number that is a toll callis available to users even if their CoS does not allow toll calls. Personalspeed dial numbers are subject to CoS.Table 38 Source of Maintenance Alert MessagesMessage Type Author Configured No Author ConfiguredLocal Voice MailMessageThe configured system user isannounced as the sender of themessage.An outside caller is announced as the sender of themessage.Offsite E-mailMessageThe name of the configured system userappears in the From field of the e-mail.The From field in the e-mail contains the wordanonymous.Offsite Voice MailMessageThe system user is announced as thesender of the message.An outside caller is announced as the sender of themessage.
