70 CHAPTER 2: D IAL P LAN■ Removing a Pretranslator from the Dial PlanIdentifying DevicesUsing PretranslatorsTo view a list of devices and their associated pretranslators, or to associatea pretranslator with a specific device:1 In the NBX NetSet – Main Menu window, click Dial Plan.2 Click the Pretranslators tab.3 Select a pretranslator, or (none) for devices that have no pretranslator.4 Click Devices Using. The Devices Using Pretranslator dialog box appears.If you selected (none) in step 3, you see a list of devices that do not use apretranslator. Table 14 describes each field. The fields are the same for theDevices Using Pretranlator for CLI dialog box.5 To move a device to the Devices Using Pretranslator list, select it in theDevices Not Using Pretranslator list and click <<. To move a device to theDevices Not Using Pretranslator list, select it in the Devices UsingPretranslator list and click >>. Then6 Click Close.To enable a specific pretranslator, update the dial plan. See “Importingand Exporting Dial Plan Configuration Files” on page 47.Creating aPretranslator forVTL CallsCalls from one NBX system to another NBX system over a VTL connectioninclude caller ID information that includes the IP address of the caller’ssystem and the caller’s extension. Each field of numbers in this caller IDstring is separated by the “*” character. For example, if extension 1002on System A calls someone on system B over a VTL connection, thedisplay panel on the System B telephone shows 10*234*208*2*1002,which indicates an incoming call from extension 1002 on the NBX systemwith the IP address 10.234.208.2.Table 14 Pretranslator FieldsField PurposePretranslator ID The identification number of the pretranslator asspecified in the dial plan.Pretranslator Name The name of the pretranslator as specified in the dialplan.Devices UsingPretranslatorDevices currently using the pretranslator.Devices Not UsingPretranslatorDevices not using the pretranslator.
