164 CHAPTER 3: D EVICE CONFIGURATION4 Click OK.5 Connect your CO line to the configured port.Modifying aLine Card PortYou can modify a line card port that is already configured.To modify a line card port:1 Select NBX NetSet > Device Configuration > Line Card Ports.2 Select the port you want to modify from the list.3 Click Modify.4 Specify the port information. The fields are the same as those describedin “Configuring a Line Card Port Manually” on page 162.Mapped to a button on theReceptionist’s Telephone (orto a button on an AttendantConsole associated with theReceptionist’s telephone)500 Receptionist’s telephone rings. If no one answers, the calltransfers to the Automated Attendant.NOTE: The call coverage point defined for the receptionist’stelephone has no affect.The transfer occurs after the number of seconds specified onthe Time Out line in the Modify Line Card Port dialog box forthe appropriate time of day (Open, Closed, Lunch, Other).Device Configuration > Line Card Ports > ModifyMapped to a button on a usertelephone (or to a button onan Attendant Consoleassociated with the user’stelephone)Extension of theReceptionistUser telephone rings. If no one answers, the call transfers tothe Receptionist’s telephone.The transfer occurs after the number of seconds specified onthe Time Out line in the Modify Line Card Port dialog box forthe appropriate time of day (Open, Closed, Lunch, Other).Device Configuration > Line Card Ports > ModifyIf the receptionist’s telephone is not answered, the calltransfers to the call coverage point defined for thereceptionist’s telephone.User Configuration > Users > User Settings > Call ForwardMapped to a button on a usertelephone (or to a button onan Attendant Consoleassociated with the user’stelephone)500 User telephone rings. If no one answers, the call transfers tothe Automated Attendant.The transfer occurs after the number of seconds specified onthe Time Out line in the Modify Line Card Port dialog box forthe appropriate time of day (Open, Closed, Lunch, Other).Device Configuration > Line Card Ports > ModifyTable 25 Auto Extension Configuration (continued)Button Mapping Settingfor This LineAuto ExtensionSetting Incoming Call Behavior
