Configuring and Managing Analog Line Card Ports 1655 Click OK.Removing aLine Card PortWhen you remove a line card port that is already configured, you removethe port information from the database.To remove a line card port:1 Select NBX NetSet > Device Configuration > Line Card Ports.2 Select the port that you want to remove from the list.3 Click Remove. A prompt asks you to confirm that you want to remove theport.4 Click Yes to remove the port.Verifying Line CardPort StatusYou can verify the status of a configured line port at any time.To view the status of a line card port:1 Select NBX NetSet > Device Configuration > Line Card Ports.2 Select the port that you want and click Status.Click the Help button to see more information about the dialog boxfields.Rebooting aLine Card PortTo reboot a line card port:1 Select NBX NetSet > Device Configuration > Line Card Ports.2 From the list, select the port that you want to reboot.3 Click Status. The Device Status dialog box appears.4 Click Reset Device.5 Click OK.CAUTION: On the 3C10117 Analog Line Card, you can reboot individualports without affecting the other ports. However, if you reboot a port onthe 3C10114C Analog Line Card, all four ports on the card are rebooted.Active telephone calls on any of these ports are disrupted.Advanced Settings The Advanced Settings button enables you to set the audio gain andtiming controls on each port of an Analog Line Card.
