Configuring the NBX Attendant Console 1593 Change the desired fields. Click the Help button to see more informationabout the dialog box fields.4 Click Apply to make the changes and then click OK.Viewing AttendantConsole StatusUse the Status button on the Attendant Console tab to check the statusof an Attendant Console. You can also reboot it from this tab with theReset Device option.To view the status of an Attendant Console:1 Select NBX NetSet > Device Configuration > Attendant Console.2 Select the Attendant Console for which you want to view the status andclick Status. The Device Status dialog box appears.3 View the settings and optionally change the Dialog Refresh, DeviceRefresh, and Reset Device settings. Click the Help button to see moreinformation about the dialog box fields.4 Click Apply to apply the settings and then click OK.Removing anAttendant ConsoleTo remove an NBX Attendant Console from the system:1 Select NBX NetSet > Device Configuration > Attendant Console.2 Select the Attendant Console that you want to remove.3 Click Remove. A dialog box prompts you to confirm the removal.4 Click Yes. The system removes the Attendant Console.ConfiguringAttendant ConsoleButtonsThis section describes how to configure the buttons on the NBXAttendant Console. The Attendant Console buttons include:■ 50 Access buttons. You can assign each button two settings.■ A Shift button. This button switches between the two settingsallowed for each Access button.■ Four Feature buttons.
