170 CHAPTER 3: D EVICE CONFIGURATIONViewing The Statusof an AnalogTerminal AdapterYou can view the status of either an Analog Terminal Adapter or one ofthe ports on an Analog Terminal Card at any time.To view the status of an Analog Terminal Adapter or a port on anAnalog Terminal Card:1 Select NBX NetSet > Device Configuration > ATA tab.Use the MAC addresses to determine whether an item in the list is an ATAor one of the ports on an ATC. Ports on a 3C10114 Analog Terminal Cardhave sequential MAC addresses. Ports on a 3C10114C Analog TerminalCard all have the same MAC address followed by a Virtual Device Number(VDN), enclosed in square brackets. An Analog Terminal Adapter has aunique MAC address with no port number.2 Select an ATA or port from the list.3 Click Status. The Device Status dialog box appears. Click the Help buttonto see more information about the dialog box fields.4 View the device status and make any necessary changes.5 To optionally send a status message to the Call Processor about the ATAor ATC port, select Device Refresh and click Apply.6 To optionally reset the ATA or ATC port, select Reset Device and clickApply. A dialog box prompts you to confirm the reset.7 Click Yes. The ATA or ATC port resets itself.CAUTION: On the 3C10114 Analog Terminal Card, you can rebootindividual ports without affecting the other ports. However, if you reboota port on the 3C10114C Analog Terminal Card, all four ports on the cardare rebooted. Active calls on any of these ports are disrupted.8 Click OK.Advanced Settings You can set the audio gain and timing controls on each port of an AnalogTerminal Card, or on an Analog Terminal Adapter. To set theseparameters:1 Select NBX NetSet > Device Configuration > ATA.2 Select one of the ports in the list and click Advanced Settings. Click theHelp button to see more information about the dialog box fields.If you change any of the values in the Advanced Settings dialog box, thesettings you change persist if you later upgrade the NBX system softwareor you change the regional software.
