System Settings 251System-wide Settings You use the System-wide dialog box to make changes to System-widesettings. Table 32 describes each setting.To configure system-wide settings:1 Log on to the NBX NetSet utility using the administrator login ID andpassword.2 Click System Configuration > System Settings > System-wide. See theHelp for procedures on modifying system-wide settings.System Start Time The last time the system was initialized (boot time).Table 31 System Settings (continued)Field PurposeTable 32 System Settings System-wide Dialog Box FieldsField PurposeHost Name An IP setting for the NBX system.A Host name functions only if you add the name to the nameresolution system. If you do not do this, then you must enterthe IP address in the browser when you want to access NBXNetSet.SMTP DomainNameThe name of your SMTP domain.Required for Off-Site Notification by e-mail.IP Address The IP address of the NBX system.Default Gateway The IP address of the destination host for any IP packet notaddressed to a host on the local subnetwork.Subnet Mask An IP setting that identifies the network and host portions ofan IP address on the network.Primary DNS The IP address of the primary DNS server. You must specify atleast a primary address to use e-mail Off-Site Notification.Secondary DNS The IP address of the secondary DNS server. If you specify twoDNS IP addresses, they must be the primary and secondaryaddresses.Tertiary DNS The IP address of the tertiary DNS server.
