9.2.8 Technical data IP13013-1 v1M13304-1 v14Table 161:OV2PTOV (59) technical dataFunction Range or value AccuracyTrip voltage, step 1 and 2 (1.0-200.0)% ofVBase ±0.5% of Vn at V ≤ Vn±0.5% of V at V > VnAbsolute hysteresis (0.0–50.0)% ofVBase ±0.5% of Vn at V ≤ Vn±0.5% of V at V > VnInverse time characteristics for steps 1and 2, see table 695- See table 695Definite time delay, low step (step 1) at 0to 1.2 x Vset(0.00 - 6000.00) s ±0.2% or ±45 mswhichever is greaterDefinite time delay, high step (step 2) at 0to 1.2 x Vset(0.000-60.000) s ±0.2% or ±45 mswhichever is greaterMinimum trip time, Inverse characteristics (0.000-60.000) s ±0.2% or ±45 mswhichever is greaterTrip time, pickup at 0 to 2 x Vset Min. = 15 msMax. = 30 ms-Reset time, pickup at 2 x Vset to 0 Min. = 15 msMax. = 30 ms-Trip time, pickup at 0 to 1.2 x Vset Min. = 20 msMax. = 35 ms-Reset time, , pickup at 1.2 x Vset to 0 Min. = 5 msMax. = 25 ms-Critical impulse time 10 ms typically at 0 to 2 x Vset -Impulse margin time 15 ms typically -1MRK 511 408-UUS A Section 9Voltage protectionPhasor measurement unit RES670 2.2 ANSI 299Technical manual
