Slope = 0.8Slope = 1OperationareaIMinOp99000068.vsdphase ref| åI | - | I |phase ref| åI | + | I |IEC99000068 V1 EN-USFigure 128: Trip characteristicsDue to the formulas for the axis compared, |SIphase | - |I ref | and |S Iphase | + | I ref | respectively, the slope can not be above 1.13.1.7 Technical dataM12358-1 v10Table 204:CCSSPVC(87) technical dataFunction Range or value AccuracyTrip current (10-200)% of IBase ±10.0% of In at I ≤ In±10.0% of I at I > InReset ratio, Trip current >90%Block current (20-500)% of IBase ±5.0% of In at I ≤ In±5.0% of I at I > InReset ratio, Block current >90% at (50-500)% of IBase13.2 Fuse failure supervision FUFSPVC IP14556-1 v3Section 13 1MRK 511 408-UUS ASecondary system supervision366 Phasor measurement unit RES670 2.2 ANSITechnical manual
