Danfoss VLT AQUA Drive FC 202 Programming Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

3.14.9 15-4* Drive IdentificationParameters containing read-only information about thehardware and software configuration of the frequencyconverter.15-40 FC TypeRange: Function:0 N/A* [0 - 0 N/A] View the FC type. The readout is identicalto the power field of the type codedefinition, characters 1–6.15-41 Power SectionRange: Function:0 N/A* [0 - 0 N/A] View the FC type. The readout is identicalto the power field of the type codedefinition, characters 7–10.15-42 VoltageRange: Function:0 N/A* [0 - 0 N/A] View the FC type. The readout is identicalto the power field of the type codedefinition, characters 11–12.15-43 Software VersionRange: Function:0* [0 - 5 ] View the combined SW version (or packageversion) consisting of power SW and control SW.15-44 Ordered Typecode StringRange: Function:0* [0 - 40 ] View the type code string used for reordering thefrequency converter in its original configuration.15-45 Actual Typecode StringRange: Function:0* [0 - 40 ] View the actual type code string.15-46 Frequency Converter Ordering NoRange: Function:0* [0 - 8 ] View the 8-digit ordering number used forreordering the frequency converter in its originalconfiguration. To restore the ordering number afterthe power card exchange, seeparameter 14-29 Service Code.15-47 Power Card Ordering NoRange: Function:0* [0 - 8 ] View the power card ordering number.15-48 LCP Id NoRange: Function:0* [0 - 20 ] View the LCP ID number.15-49 SW ID Control CardRange: Function:0* [0 - 20 ] View the control card software version number.15-50 SW ID Power CardRange: Function:0* [0 - 20 ] View the power card software version number.15-51 Frequency Converter Serial NumberRange: Function:0* [0 - 10 ] View the frequency converter serial number.15-53 Power Card Serial NumberRange: Function:0* [0 - 19 ] View the power card serial number.15-54 Config File NameArray [5]Range: Function:Size related* [0 - 16 ] Shows the special configurationfilenames.15-58 SmartStart FilenameRange: Function:Size related* [0 - 20 ] Shows the SmartStart filename.15-59 FilenameRange: Function:Size related* [0 - 16 ] Shows the currently used CSIV(costumer-specific initial values)filename.3.14.10 15-6* Option Ident.This read-only parameter group contains information aboutthe hardware and software configuration of the optionsinstalled in slots A, B, C0, and C1.15-60 Option MountedArray [8]Range: Function:0* [0 - 30 ] Shows the type of the installed option.15-61 Option SW VersionArray [8]Range: Function:0* [0 - 20 ] View the installed option software version.Parameter Description Programming GuideMG20OB02 Danfoss A/S © 05/2018 All rights reserved. 1473 3