Danfoss VLT AQUA Drive FC 202 Programming Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

23-61 Continuous Bin DataRange: Function:0* [0 -4294967295 ]Array with 10 elements ([0]-[9] belowparameter number in display). Press [OK] andstep between elements with [▲] and [▼].10 counters with the frequency ofoccurrence for the operating variablemonitored, sorted according to the followingintervals:• Counter [0]: 0–<10%.• Counter [1]: 10–<20%.• Counter [2]. 20–<30%.• Counter [3]: 30–<40%.• Counter [4]: 40–<50%.• Counter [5]: 50–<60%.• Counter [6]. 60–<70%.• Counter [7]: 70–<80%.• Counter [8]. 80–<90%.• Counter [9]: 90–<100% ormaximum.The above minimum limits for the intervalsare the default limits. These can be changedin parameter 23-65 Minimum Bin Value.Starts to count when the frequencyconverter is powered up for the first time. Allcounters can be reset to 0 inparameter 23-66 Reset Continuous Bin Data.23-62 Timed Bin DataArray [10]Range: Function:0* [0 -4294967295 ]Array with 10 elements ([0]-[9] belowparameter number in display). Press [OK] andstep between elements with [▲] and [▼].10 counters with the frequency of occurrencefor the operating data monitored sortedaccording to the intervals as forparameter 23-61 Continuous Bin Data.Starts to count at the date/time programmedin parameter 23-63 Timed Period Start, andstops at the time/date programmed inparameter 23-64 Timed Period Stop. Allcounters can be reset to 0 inparameter 23-67 Reset Timed Bin Data.23-63 Timed Period StartArray [10]Range: Function:Sizerelated*[ 0 -0 ]NOTICEThe frequency converter has no back-upof the clock function. The set date/timeis reset to default (2000-01-01 00:00)after a power-down unless a real-timeclock-module with back-up is installed.Therefore, the logging is stopped untildate/time is readjusted inparameter 0-70 Date and Time. Inparameter 0-79 Clock Fault, it is possibleto program a warning if the clock hasnot been set properly, for example aftera power-down.NOTICEWhen mounting VLT® Analog I/O optionMCB 109, a battery back-up of the dateand time is included.Set the date and time at which the trendingstarts the update of the timed bin counters.Date format depends on setting inparameter 0-71 Date Format, and time formaton setting in parameter 0-72 Time Format.23-64 Timed Period StopRange: Function:Sizerelated*[ 0 -0 ]NOTICEWhen mounting VLT® Analog I/OOption MCB 109, a battery back-up ofthe date and time is included.Set the date and time at which the trendanalyses must stop updating the timed bincounters.Date format depends on the setting inparameter 0-71 Date Format, and time formaton the setting in parameter 0-72 Time Format.Parameter Description Programming GuideMG20OB02 Danfoss A/S © 05/2018 All rights reserved. 1993 3