Danfoss VLT AQUA Drive FC 202 Programming Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

0-71 Date FormatOption: Function:[0] YYYY-MM-DD Sets the date format to be used in the LCP.[1] DD-MM-YYYY Sets the date format to be used in the LCP.[2] MM/DD/YYYY Sets the date format to be used in the LCP.0-72 Time FormatOption: Function:Sets the time format to be used in the LCP.[0] 24 h[1] 12 h0-73 Time Zone OffsetRange: Function:0 min* [-780 - 780min]Enter the time zone offset relative toUTC. This parameter is required for theautomatic daylight saving timeadjustment.0-74 DST/SummertimeOption: Function:Select how to handle daylight saving time/summertime. For manual setting of DST/summer time,enter the start date and end date inparameter 0-76 DST/Summertime Start andparameter 0-77 DST/Summertime End.[0] * Off[2] Manual0-76 DST/Summertime StartRange: Function:Sizerelated*[ 0 - 0 ] Sets the date and time when DST/summer time starts. The date isprogrammed in the format selected inparameter 0-71 Date Format.0-77 DST/Summertime EndRange: Function:Sizerelated*[ 0 - 0 ] Sets the date and time when DST/summer time ends. The date isprogrammed in the format selected inparameter 0-71 Date Format.0-79 Clock FaultOption: Function:Enables or disables the clock warning when theclock has not been set, or has been reset due to apower-down and no back-up is installed. If VLT®Analog I/O Option MCB 109 is installed, [1] Enabledis default.[0] Disabled[1] Enabled0-81 Working DaysArray [7]Array with 7 elements [0]–[6] shown below the parameternumber in the display. Press [OK] and step between elementswith [▲] and [▼].Option: Function:Set for each weekday if it is a working day or a non-working day. First element of the array is Monday. Theworking days are used for timed actions.[0] No[1] Yes0-82 Additional Working DaysArray [5]Array with 5 elements [0]–[4] shown below the parameternumber in the display. Press [OK] and step between elementswith [▲] and [▼].Range: Function:Size related* [ 0 - 0 ] Defines dates for additional working daysthat would normally be non-workingdays according to parameter 0-81 WorkingDays.0-83 Additional Non-Working DaysArray [15]Array with 15 elements [0]–[14] shown below the parameternumber in the display. Press [OK] and step between elementswith [▲] and [▼].Range: Function:Size related* [ 0 - 0 ] Defines dates for additional working daysthat would normally be non-workingdays according to parameter 0-81 WorkingDays.0-84 Time for FieldbusRange: Function:0* [0 - 4294967295 ] Shows the time for fieldbus.0-85 Summer Time Start for FieldbusRange: Function:0* [0 - 4294967295 ] Shows the summer time start forfieldbus.0-86 Summer Time End for FieldbusRange: Function:0* [0 - 4294967295 ] Shows the summer time end for fieldbus.Parameter Description VLT® AQUA Drive FC 20238 Danfoss A/S © 05/2018 All rights reserved. MG20OB0233