Appendix D—Modbus Register MapPower Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com 2934014 RTC Time Zone DST SettingStatusUINT8 ROEnumConfig CRCAdmin LockUSB LockReal Time Clock Time Zone DST Setting Status: 0 = Okay, 1 = Manual Ruleerror, 2 = Time Zone error, 3 = Conversion out of range, 4 = Internal error.4015 RTC DST Rule UINT8 RW NVDefault: 0EnumConfig CRCAdmin LockUSB LockBackup MemReal Time Clock DST Rule Selection: 0 = No daylight savings time, 1 =Manually set DST start and end, 2 = Europe, 3 = United States of America,4 = Australia, 5 = Brazil, 6 = New Zealand, 7 = United States before 2007.4016 RTC DST End UINT8 RW NVArray size: 5Default: 11, 1, 7, 2, 0Config CRCAdmin LockUSB LockBackup MemReal Time Clock Manual Daylight Savings Time Rule End date/time(Element 0 = month, Element 1 = week, Element 2 = weekday, Element 3 =hour, Element 4 = minute).Array of 3 registers4019 RTC DST Start UINT8 RW NVArray size: 5Default: 3, 2, 7, 2, 0Config CRCAdmin LockUSB LockBackup MemReal Time Clock Manual Daylight Savings Time Rule Start date/time(Element 0 = month, Element 1 = week, Element 2 = weekday, Element 3 =hour, Element 4 = minute).Array of 3 registers4022 RTC Month and Date UINT8 ROArray size: 2Real Time Clock Month and DateArray of 1 registers4023 RTC Time Zone Ahead ofUTCUINT8 RW NVDefault: 0EnumConfig CRCAdmin LockUSB LockBackup MemReal Time Clock calculation for Time Zone ahead of UTC. If true,UTC+hh:mm; otherwise UTC-hh:mm4024 RTC Time Zone hh mm UINT8 RW NVArray size: 2Default: 0Config CRCAdmin LockUSB LockBackup MemTime zone assignment (UTC+/-hh:mm). Where 0xhhmm. Element [0] =Minutes Element [1] = HoursArray of 1 registerTable 127. C445 Modbus Register Map, continuedRegister Name Attribute DescriptionValue Description0 Okay1 Manual rule error2 Time zone error3 Conversion out of range4 Internal errorValue Description0 No daylight savings time1 Manually set DST start and end2 Europe3 United States of America4 Australia5 Brazil6 New Zealand7 United States before 2007Value Description0 UTC - hh: mm1 UTC + hh: mm
