Appendix D—Modbus Register MapPower Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com 2976028 Ethernet Port 1 Enable BOOL RW NVDefault: 1Config CRCAdmin LockUSB LockThis parameter is used to disable the Ethernet port. True = Enable PortFalse = Disable Port6029 Ethernet Port 2 SpeedSelectUINT16 RW NVDefault: 100EnumUnits: MbsConfig CRCAdmin LockUSB LockSelect the Ethernet link speed. Only used when Auto-Negotiate isdisabled.6030 Ethernet Port 2 SpeedActualUINT16 ROEnumUnits: MbsActual Ethernet link speed. This is a read only parameter.6031 Ethernet Port 2 Full DuplexEnableBOOL RW NVDefault: 1Config CRCAdmin LockUSB LockSelects the duplex mode. Only used when Auto-Negotiate is disabled.True = Full Duplex False = Half Duplex6032 Ethernet Port 2 Full DuplexEnabledBOOL RO Actual duplex mode. This is a read only parameter. True = Full DuplexFalse = Half Duplex6033 Ethernet Port 2Autonegotiate EnabledBOOL RW NVDefault: 1Config CRCAdmin LockUSB LockSelects Auto-Negotiation of link speed and duplex. False = DisabledTrue = Enabled (default)6034 Ethernet Port 2Autonegotiate StateUINT8 ROEnumActive state of the Auto-Negotiation behavior. This is read only.6035 Ethernet Port 2 Enable BOOL RW NVDefault: 1Config CRCAdmin LockUSB LockThis parameter is used to disable the Ethernet port. True = Enable PortFalse = Disable Port6036 IP Conflict Detection Enable BOOL RW NVDefault: 1Config CRCAdmin LockUSB LockAddress Conflict Detection enable. ACD provides protection fromduplicate IP addresses on the network. 0 = Disable ACD, 1 = Enable ACD.Table 127. C445 Modbus Register Map, continuedRegister Name Attribute DescriptionValue Description10 10 Mbps100 100 MbpsValue Description10 10 Mbps100 100 MbpsValue Description0 Link inactive1 Auto negotiation in progress2 Auto negotiation failed3 Auto negotiation of duplex failed (speed ok)4 Auto negotiation success5 Auto negotiation disabled6 Port disabled
