Chapter 6 HPSS ConfigurationHPSS Installation Guide September 2002 361Release 4.5, Revision 26.8.10.1 NFS Daemon Configuration VariablesTable 6-28 lists the fields on the NFS Daemon Configuration window and provides specificrecommendations for configuring the NFS Daemon for use by HPSS.Table 6-28 NFS Daemon Configuration VariablesDisplay Field Name Description Acceptable Values DefaultValueGeneral Parameters. The following fields define general information for the NFS Daemon.Server Name The descriptive name ofthe NFS Daemon. Thisname is copied over fromthe NFS Daemon generalconfiguration entry.This field cannot be modified. It isdisplayed for reference only.The selectedNFS DaemondescriptivenameServer ID The UUID of the NFSDaemon. This ID is copiedover from the NFSDaemon generalconfiguration entry.The UUID of the NFS Daemon.This field cannot be modified. It isdisplayed for reference only.Extractedfrom the NFSDaemongeneralconfigurationentry.Maximum RPC Threads The number of NFSrequests that can beprocessed concurrently.Any positive 32-bit integer value 32Advice: Set this field based on the maximum number of concurrent requestsexpected. In general, it should be at least 8.Maximum READ Size The maixmum size for aread request supported bythe serverAny positive 32-bit integer value 8192Preferred READ Size The size of read buffer theclient should be using toget optimal performanceAny positive 32-bit integer valueless than or equal to MaximumREAD Size8192Maximum WRITE Size The maximum size for awrite request supported bythe serverAny positive 32-bit integer value 8192Preferred WRITE Size The size of write buffer theclient should be using toget optimal performanceAny positive 32-bit integer valueless than or equal to MaximumWRITE Size8192Preferred READDIR Size Recommended size for aREADDIR requestAny positive 32-bit integer value 8192
