Chapter 6 HPSS ConfigurationHPSS Installation Guide September 2002 373Release 4.5, Revision 26.8.13 Configure the PVR Specific InformationThe PVR specific configuration entry can be created using the PVR Server Configuration window.After the configuration entry is created, it can be viewed, updated, or deleted through the samewindow.If you are configuring a PVR for StorageTek, IBM 3494/3495/3584, or ADIC AML; beforeproceeding with PVR configuration you should read the PVR-specific section (Section 6.8.13.4:StorageTek PVR and RAIT PVR Information on page 389,Section 6.8.13.3: IBM 3494/3495 PVRInformation on page 388, Section 6.8.13.2: LTO PVR Information on page 387, and Section6.8.13.5: ADIC Automatic Media Library Storage Systems Information on page 392). These sections provideadditional vendor-specific advice on PVR/robot configuration.The STK RAIT PVR cannot be supported at this time since STK has not yet made RAITgenerally available.From the HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, selectthe Configure HPSS option and click on the Servers option. The HPSS Servers window will bedisplayed as shown in Figure 6-5.To add a new specific configuration, select the PVR Server entry and click on the Type-specific...button from the Configuration button group on the HPSS Servers window. The PVR ServerConfiguration window will be displayed (as shown in figures 6-33 through 6-39) depending on theselected PVR type) with default values. If the default data is not desired, change the fields with thedesired values. Click on the Add button to create the configuration entry.To update an existing configuration, select the PVR Server entry on the HPSS Servers window andclick on the Type-specific... button from the Configuration button group. The PVR ServerConfiguration window will be displayed with the configured data. After modifying theconfiguration, click on the Update button to write the changes to the appropriate SFS file.To delete an existing configuration, select the PVR Server entry on the HPSS Servers window andclick on the Type-specific... button from the Configuration button group. The PVR ServerConfiguration window will be displayed with the configured data. Click on the Delete button todelete the specific configuration entry.Refer to the window’s help file for more information on the individual fields and buttons as well asthe supported operations available from the window.
