Panasonic LP-V Series Operation And Maintenance Manual
Also see for LP-400 Series: External Control ManualOperation manual
                                                                                                                                                                                                                                                                                                                                              | |
Contents
|
1244-2 Functional DescriptionFunctions OutlineMarking order optimizing This allows rearranging of marking order of characters to shorten the time required formarking.Intersection offset This keeps the intersection points of characters from being engraved too deeply.Counter marking The marking is performed sequentially according to the counter conditions you set.(Count-up/Count-down)Current date marking This allows marking of current date or time.Expiry date marking This allows marking of date or time calculated by adding the specified period/time to thecurrent date or hour.Lot marking This allows marking by replacing the current (expiry) date, time, and counter value withspecified character string for marking.Time hold input The time hold signal equipped in I/O connector keeps the time and date at the timing ofits ON input.By following the holding time, the functions based on the clock, such as current date,expiry date, lot and counter reset at updating operate.Logo data marking This allows marking of the drawing data in DXF/HPGL/BMP/JPEG/AI/EPS form. (DXFformat data may be directly imported into the laser marker. Other data needs to beconverted using the attached software in advance.)Barcode marking Marking of various bar codes, 2D codes and composite codes is possible. Inputtingcharacter data will automatically generate a bar code.Processing PerformancefunctionSpecify the coordinates for “Straight Line”, “Circle”, or “Arc”, and radiate the laser.Arbitrary Point IrradiationFunctionSpecify the coordinates for “Point” and exposure time, and radiate the laser.Flying Object markingfunctionMarking following the moving target object is possible according to the specified linespeed and encoder signal.Step & Repeat This allows marking of character string in matrix state by specifying the numbers of Row/Column and the Intervals.Over-marking Overlapping marking is done according to the specified overwriting frequency andinterval.Rank marking A number of character strings are registered in the data table, and marking is done byswitching with the I/O signals.External offset (X/Y) A number of marking coordinates are registered in the data table, and marking is doneby switching with the I/O signals.Serial data marking Marking is performed, changing the marking character string using communicationcommand.Bold character marking Mark a character string in bold.Marking shape setting This allows for selection of marking shapes: “Straight Line”, “Proportional”, “Justify”, and“Fan like form”.Font selection This allows for selection of registered fonts for marking character (alphanumeric). Fontscan be newly created and edited with the attached software.Marking image display This allows displaying of characters or graphic to be marked on the image screen.Guide laser function *1 The marking position can be checked with the red guide laser. (Marking area , andcharacter string to be marked)Dual pointer function *1 The work distance can visually be confirmed using the guide laser and laser pointer.ME-LP400V-OP-6 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine