762-2-4 When Using Console (Option)• When using the console LP-ADP40 (optional item), connect the return harness to the rear of the controller.• Do not take out and put in the console in being powered on.Return HarnessTo CONSOLEFront side of ControllerLP-ADP40 (Option)Rear side of ControllerTo (VGA+COM1) INRETURN OUTTo VGA OUT2-2-5 When Using Monitor and Mouse• Be sure to check the operation status when using the monitor and mouse beforehand. This connection status does notwarrant all operations of VGA monitor and USB mouse.• Do not take out and put in a monitor, and a mouse in being powered on.• When using monitor and mouse, do not connect the return harness.• USB hub cannot be used for this product.• There is 1 port on the front of the controller and 2 ports on the back for USB connector A. USB mouse can be connectedin any of these ports.• The connectable monitor and mouse are as follows:Monitor: VGA terminal (15-pin 3-row) (Recommended Pixel Count: 640×480 or more)Mouse: USB mouse with Human interface device (HID) classRear side of ControllerTo VGA OUTMouseMonitorTo USB Connector AME-LP400V-OP-6
