150⿎ Input Method of Symbols1. Press [SYMBOLS].2. Press the symbol to be input directly for input.The symbol table is changed by pressing [<] [>].The character is input by pressing [SET].⿎ When inputting wrong character1. Press [BS] or [DEL] to delete character.[BS] (Back Space): Deletes one character before cursor and movesthe cursor by one character simultaneously.[DEL] (DELETE): Deletes one character behind the cursor.⿎ Input Method of User Registration Character1. Press [REG. CHAR.] (REGISTRATION CHARACTER).2. Press the symbol No. to be input directly for input.The character is input by pressing [SET].Reference• It needs to register the font created by the user into the user registration font and, also register to laser marker. Refer to“4-15-4 Font File” (P.244).• The following characters are registered as the user registration font “U1” to “U9” as the factory settings:• On the button of U1 to U50 in the user registration character input screen, the registered character images are displayedtogether.ME-LP400V-OP-6
