198⿎ Setting for QR Code and DataMatrix CodeDescription1 Version (QR code only):Specifies the symbol size of QR code and micro QR code.When “0” is selected, the size is specified to be the minimum automatically. In this case, the symbol size maychange depending on the input code data.Refer to “QR Code Version and Data Capacity” (P.319) for detail.Setting RangeWhen QR code model 1 is set : 0 to 14When QR code model 2 is set : 0 to 22When micro QR code is set : 0 to 42 Symbol (DataMatrix code only):Specifies the symbol size (module unit) of DataMatrix code. Select “Auto” or “Manual”. When “Auto” is selected, thesize is specified to be the minimum.Refer to “Symbol Size and Data Capacity” (P.322) for detail.Square : 10×10, 12×12, 14×14, 16×16, 18×18, 20×20, 22×22, 24×24, 26×26, 32×32, 36×36, 40×40,44×44, 48×48, 52×52, 64×64, 72×72, 80×80, 88×88Rectangle : 8×18, 8×32, 12×26, 12×36, 16×36, 16×483 Mode :Input mode for the code data. Depending on the mode, available characters vary. Refer to “Code Type and CodeData” (P.190).• For QR code, select the mode from “Number”, “Alpha”, “Binary” or “Kanji”.• For DataMatrix code, select the mode from “ASCII” or “Kanji”.• For GS1 DataMatrix code, data input mode is fixed to binary mode.4 Err. Cor. (Error Correction) (QR code only):Specifies the error correction level of QR code.Select from “L (7%)”, “M (15%)”, “Q (25%)” or “H (30%)”.2361345 5QR Code DataMatrix Code6ME-LP400V-OP-6
