813-2-1 Setup and connect the laser markerReference• For the installation and connecting, refer to “2-1 Installation” (P.59) and “2-2 Connecting Laser Marker” (P.72).1. Install the laser marker ensuring the following points.• Take laser protection measures required to use Class 4 laser products.• Please avoid vibration and install in a place without any shocks.• For the proper cooling performance, install not to bar the flow of air.2. Connect the head and controller of the laser marker using these cables.• Head control cable• Head power cable• Fiber cable *13. Connect the following devices and cables to the controller.• Touch panel console and return harness, or monitor and mouse, or PC• I/O terminal *24. Connect the controller power cable.*1 : Only for LP-V and LP-W series. The fiber cable cannot be detached from the device.*2 : Wire the each terminals depending on the control method.* Place a protective enclosure in the range of laser radiation for actual use.ME-LP400V-OP-6
