155⿎ CounterWhen inputting counter character, the counter is marked with the condition set previously.Set the expiry date function “4-9-2 Counter” (P.164), and set the character.Refer to “3-3-4 Mark Counter” (P.101).Reference• To update the function characters such as current date, expiry date, lot, counter, and etc. on the operation monitor, setthe “Update Func. Char.” in the environment setting screen referring to “4-16-1 Display Setting (Environment 1)” (P.253).• The counter does not operate at test marking mode.24513Description1 Counter (Counter No.):Select the No. of the counter condition set in the function screen.Setting Range Counter No.: 0 to 3Common counter No.: 4 to 7Notice• The counters 0 to 3 are commonly set per 256 file. For example, the counters 0 to 3 with file No. 0 are applied thesame counter of that of 256, 512, 768, 1024, 1536 and 1792 files.2 Figure:Sets the digit number to show the counter. When the number of figures of the value to be marked is larger thansetting figure, the lower figure is marked as the number of figures set previously.Setting Range 1 to 6 figures3 Offset:Adds the setting value to the counter value, and marks its value.Setting Range 0 to 94 Numbers:Displays number.Setting Range Binary numbers to 36 numbersME-LP400V-OP-6
