324 Setting Value for AUTO SetWhen pressing “AUTO” button after setting bar code and referential module width for the following code symbols, GS1DataBar, GS1 DataBar Truncated, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited,GS1 DataBar Expanded, GS1 DataBar Expanded Stacked, the following setting value is set automatically with each “W”(Width) be used as the reference for calculating the setting value.Setting Screen Setting Item GS1 DataBar/GS1 DataBar TruncatedBar Code Condition Bar Code Height 33WSeparator Pattern Height/(W) Ratio * 1Quiet/(W) Ratio * 1Inversion InversionGuard AvailableHuman Readable Text Available(Character Height: 6W, Character Width: 5W,Character Interval: 4.5W, Line Feed: None *, LineInterval: 7.5W *)Composite Row Height * 2WRows Number * 0 (minimization)Laser Setting Line Width LP-400 series: half of the “Module width”LP-V/LP-W series: half of the “line width” initial valueMarking Pitch LP-400 series: half of the “Module width”LP-V/LP-W series: same value with the “line width”initial valueMarking Quality Adjustment-Wait Adjustment10* This setting item is set automatically when selecting GS1 DataBar CC-A, CC-B.Setting Screen Setting Item GS1 DataBar Stacked GS1 DataBar StackedOmnidirectionalBar Code Condition Bar Code Height 7W 33WSeparator Pattern Height/(W) Ratio * ― 1Quiet/(W) Ratio * 1Inversion InversionGuard AvailableHuman Readable Text Available(Character Height: 6W, Character Width: 5W,Character Interval: 4.5W, Line Feed: None *, LineInterval: 7.5W *)Composite Row Height * 2WRows Number * 0 (minimization)Laser Setting Line Width LP-400 series: half of the “Module width”LP-V/LP-W series: half of the “line width” initial valueMarking Pitch LP-400 series: half of the “Module width”LP-V/LP-W series: same value with the “line width”initial valueMarking Quality Adjustment-Wait Adjustment10* This setting item is set automatically when selecting GS1 DataBar CC-A, CC-B.ME-LP400V-OP-6
