247⿎ Register to InsideThe file data saved in USB media is registered to laser marker.1. Select the file in the USB media after selecting directory,and press [EXECUTE].For logo files, when pressing [ALL], the all logo files are selected.Reference• Selecting the category title in the list and pressing [▲] [▼] displays the list by selected item in ascending/descendingorder.• By selecting the directory in which the backup data is saved, it is possible to import an individual file from the backupdata.2. For registration files and font files, select the file number tobe registered, and press [EXECUTE].Reference• When copying the registration file in that a logo file is used, register the logo file to the laser marker, too.• In case of transferring the registered file in the new version controller to the old version controller, settings of newfunctions (of the new version controller) are not available (registered).• In case of transferring the registered file in the old version controller to the new version controller, settings of newfunctions (of the new version controller) are set as default value.• Up to 2048 logo file can be registered into the laser marker.• Up to 1,445,376 byte logo file can be registered into the laser marker.ME-LP400V-OP-6
