254⿎ Operator Adjustment Screen/Adjustment Accepted ParametersThe setting parameters that can be set on the operator’s adjustment screen are selected. Refer to “4-4 Operator AdjustmentScreen” (P.129).12Description1 Setting permission:Check the respective boxes to make the adjustment on the operator’s adjustment screen possible.• Offset• Line Speed• Laser Power• Scan Speed• Laser Pulse Cycle (Only LP-V series)• Change File No.• Overwriting• Laser Check2 Editable Lines:Sets the number of line possible to be edited at the edition of character setting on the operator’s adjustmentscreen.Setting Range 0 to 50 linesReference• Setting of password is useful to avoid unintentional change of setting by operator. Setting of parameters only thespecified operators can change is possible, too. Refer to “4-16-1 Display Setting (Environment 1)” (P.253) or “4-3-3Password to Open the Setting Screen” (P.128) for the setting of password.ME-LP400V-OP-6
