210⿎ Arc13 42Description1 Start Point X/Y :End Point X/Y :Specifies the starting / ending point of arc.Setting Range-45.000 to +45.000 mm (LP-V10)-55.000 to +55.000 mm (LP-430 / LP-420 / LP-410)-80.000 to +80.000 mm (LP-435 / LP-425 / LP-V15)-27.500 to +27.500 mm (LP-431 / LP-421 / LP-411 / LP-W052)2 Radius:Inputs the radius of arc.Setting Range 0.010 to 300.000 mm3 Direction:For the arc in counterclockwise direction, select [CCW] and in clockwise direction, select [CW].4 Open Ang. (Open Angle):Select the open angle of the arc from “under” or “over” 180 degree.Open Angle CounterclockwiseClockwiseOpen AngleStart Point(X,Y)End Point(X,Y)RadiusRadiusRadiusRadiusOpen AngleCounterclockwiseClockwise Open AngleStart Point(X,Y)End Point(X,Y)RadiusRadiusRadiusRadius• Open Angle: under 180 degree • Open Angle: 180 degree or moreME-LP400V-OP-6
