158⿎ Marking Condition (Marking of Laser Settings)With this function, the setting value of the laser settings such as laser power and scan speed is marked.To check the marking quality with several laser settings, use this function.Reference• The functional characters of the laser settings are displayed in 5 digits including decimal point with right-justified.• When marking laser power, scan speed, and laser pulse cycle at the same time, perform function input for each item.• It is not possible to set the functional characters of the laser settings to bar code and 2D code data.Setting procedures1. Press [FUNC. CHAR.] (FUNCTION CHARACTER).2. Press [CONDITION].Select the marking contents from the followingparameters.• Laser power• Scan speed• Laser pulse cycle (Only LP-V series)3. Press [INPUT] and then, press [SET].Character strings to represent the functional characters of marking condition%POWER: Laser Power%SPEED: Scan Speed%PULSE: Laser pulse cycle (Only LP-V series)231ME-LP400V-OP-6
