2000-A2-GB20-10 - 95 - February 2004Quick Con-figurationThe JF2304 and JF2308 contain a number of predefined configurations forphysical connections and PVCs.To use one of the predefined configurations:1. On the Main menu, type 5 to select Configure WAN.2. The IAD displays the WAN Configuration menu.Figure 4–66. WAN Configuration MenuType 0 to select Quick Configuration.3. The IAD displays the Quick Configuration menu.Figure 4–67. Quick Configuration Menu4. Type the option corresponding to the DSLAM to which the IAD isconnected.5. The IAD automatically resets.6. To continue configuration, log back on to the IAD.LAN LINK LAN ACT WAN LINK VOICEPOWERJF2304JF2308The Quick Configuration option is displayed only on theJF2304 and JF2308.****************************************** WAN Configuration menu ******************************************Configuring SDSL0. Quick Configuration1. Configure Datalink Protocol2. Configure Physical Interface*****************************************Quick Configuration******************************************* System will reset after changing configuration **Current configuration:Differs from listed configurations1. Lucent Stinger (Conexant Autobaud, PayloadScrambling)2. Nokia (Auto Cycle)3. Coppermountain (Auto Sense)4. Paradyne (Unframed 784kbps, Payload Scrambling)5. AccessLan CPE6. ATM (Unframed, 1152kbps fixed)7. Frame Relay (784kbps fixed)