2000-A2-GB20-10 - 237 - February 2004Using theDiagnosticsMenuDiagnostic tasks are all displayed and accessed on the Diagnostics menu(displayed by typing Z on the Main menu). Tasks in this chapter aredescribed beginning at the Diagnostics menu.Figure 14–1. Diagnostics MenuYou may sign on as Supervisor or Network Manager to performdiagnostics tasks. Options that display in the Diagnostics menu are thesame for both security levels. Type the option and proceed to thecorresponding section.POTSDiagnosticsA WAN uplink is not required to perform POTS testing. To perform POTSdiagnostics type P on the Diagnostics Menu.The IAD loads and configures the DSP software module, and displays thefollowing menu:Figure 14–2. POTS Diagnostics Menu*******************************************Diagnostics Menu*******************************************P. POTS DiagnosticsS. SDSL DiagnosticsB. ISDN-BRI DiagnosticsNOTE Option S (SDSL Diagnostics) is available only on SDSL-equipped IADs: JF2304 and JF2308. Option B (ISDN-BRIDiagnostics), is available only on the JF2004i and theJF2104i.*******************************************POTS Diagnostics*******************************************D. Dialup TestH. Hotline TestR. Ring TestS. Power Supply TestP. Phone Detect TestR. Ring TestO. On/Off Hook TestI. Infineon Codec Test
