2000-A2-GB20-10 - 176 - February 2004NATStatisticsWhen NAT is enabled, you can review statistics gathered as NAToperates. To display NAT statistics, type S on the NAT Configuration menu.The IAD displays the following information (sample):timeouts: TCP: 300, UDP: 120local to inet: pkts:0, bytes:0inet to local: pkts:0, bytes:0Connections: TCP 0, UDP:0, ICMP:0 created: 0, deleted 0Total Fragments: local to inet: 0, inet to local: 0First Fragments: local to inet: 0, inet to local: 0Queued Fragments: local to inet: 0, inet to local: 0Deleted Fragments: local to inet: 0, inet to local: 0Fragment Entries: created: 0, deleted: 0Errors: cksum: 0, retries: 0, bad packets: 0Total IP pkts: 0, Reserved addresses: 0, Discardedpackets 0Press any key to return to the NAT Configuration menu.Table 11–2.NAT StatisticsReport Entry DescriptionTimeouts TCP and UDP Timeout values.Local to inet Number of packets and bytes transferring tothe Internet.inet to Local Number of packets and bytes receiving fromthe Internet.Connections Number of active TCP, UDP and ICMPconnections, as well as the number createdand deleted.Total Fragments Total fragments: local to internet, and internetto localFirst Fragments Number of first fragments: local to internet, andinternet to localQueued Fragments Number of queued fragments: local to internet,and internet to localDeleted Fragments Number of queued fragments: local to internet,and internet to localFragment Entries Number of created and deleted fragmententries.Errors Number of checksum, retries and bad packets.Total IP packets Number of IP packets—reserved addressesand discarded packets.
