2000-A2-GB20-10 - 144 - February 20042. The IAD saves the changes and displays the menu.3. Press Escape to return to the CopperCom Configuration menu andcontinue configuration.4. Reset the IAD (page 14) when you finish voice path configuration.CopperCom Debug ControlThe commands in the CopperCom Debug Control menu are reserved foruse by Paradyne or CopperCom network engineers.JetStreamCall Con-trol Set-tingsWhen you have specified the JetStream (Paradyne) Voice Gateway, typeE to display the Call Control Settings menu for JetStream:Figure 7–18. Call Control Menu for JetStream Voice GatewayType the option for the task to perform and proceed to the appropriatesection.Displaying StatisticsType A to display the JetStream Voice Gateway statistics report:WAN RX PKTSWAN RX BYTESWAN TX PKTSWAN TX BYTESWAN TX DROPPEDPOTS RX PKTSPOTS RX BYTESPOTS TX PKTSPOTS TX BYTESPOTS TX DROPPEDL2 RX PKTSL2 RX BYTESL2 TX PKTSL2 TX BYTESAAL2 HEC ERRORPerforming a Ring TestType R to set up and run a ring test.The IAD displays the Ring Test menu:*******************************************Call Control Settings*******************************************A. Stats DisplayR. Ring TestS. Display IAD stateT. TraceV. Pick sound heard if insufficient WAN B/W tocomplete callZ. Zero Stats DisplayNOTE This command is reserved for use by Paradyne networkengineers only.
