2000-A2-GB20-10 - 217 - February 2004Route TableReportType R to display the Route Table report in the Reports menu. The IADlists each route by IP address, and displays the following information aboutstatically configured routes and dynamically learned ones.ARP TableReportAddress Resolution Protocol (ARP) obtains the Ethernet MAC address fora known IP address.Type A on the Reports menu to display the following information aboutmappings between Ethernet Media Access Control (MAC) addresses(hardware addresses) and IP addresses.Bridge For-wardingDatabaseReportTo display information about mappings between Ethernet addresses anddevices connected to the LAN, type B on the Reports Menu. The IADdisplays the following information:Table 12–26.Route Table ReportParameter DescriptionNetwork Address destination addressNetmask IP subnet mask; no. of bits reserved for the hostIDGateway Address IP address of packets sent to destinationInterface IP address of outgoing interfaceMetric no. of hops (routers) required to reach thespecified gatewayType static | dynamic | RIP | localTable 12–27.ARP Table ReportParameter DescriptionIP Address IP address that corresponds to the MACaddressEthernet Address Ethernet address of the device; assigned by themanufacturerInterface The interface for the Ethernet addressTable 12–28.Bridge Forwarding Database ReportParameter DescriptionEthernet Address Ethernet address of the device; assigned by themanufacturerInterface Interface for the Ethernet address