2000-A2-GB20-10 - 12 - February 20049. Press any key, and repeat the log in sequence. If you cannot log in, callyour support provider for assistance.When you first log in, the IAD displays the Main menu. The menu mayvary, depending on the IAD.Figure 2–1. Main MenuSetting the Ethernet Port IP AddressBefore you configure the Ethernet IP address, you should know the IPaddress and subnet mask that is to be assigned to this port. It may bedisplayed on the work order, or you may obtain or determine theappropriate IP address by consulting with the network administrator.The IAD is shipped with a null IP address and subnet mask. To configure aport IP address:1. On the Main menu, type 2 to select Configure IP Router.2. The IAD displays the Router Configuration menu.*****************************************Main Menu*****************************************1. Reports Menu2. Configure IP Router3. Configure Bridge5. Configure WAN6. Configure LAN7. Configure SNMP8. Configure Login9. System UtilitiesD. Configure DHCP ServerM. Configure MulticastN. Configure NATT. Telephony Clock RecoveryZ. Diagnostics MenuC. Command Line InterfaceR. Reset SystemP. Voice Path ConfigureE | A | O. CopperCom Call ControlOptions E, A and Ovary, depending on thevoice gateway selectedin the Voice PathConfigure command.
