Capacity Related Parameters B - 3Parameters Affected by Drive Capacity SettingThe factory setting of the parameters in Table B.2 may change when the Drive capacity is changed via parameter o2-04. SeeTable B.3 and B.4 for a complete list.Table B.2 Parameters Affected by o2-04ParameterNumberParameter NameDigital Operator DisplayParameterNumberParameter NameDigital Operator Displayb8-03 Energy Saving Control Filter Time ConstantEnergy Saving F.T E4-02 Motor 2 Rated SlipMotor Rated Slipb8-04 Energy Saving Coefficient ValueEnergy Save COEF E4-03 Motor 2 No-Load CurrentNo-Load CurrentC6-01 Carrier Frequency DutyHeavy/Normal Duty E4-05 Motor 2 Line-to-Line ResistanceTerm ResistanceE2-01 Motor Rated CurrentMotor Rated FLA E4-06 Motor 2 Leakage InductanceLeakage InductanceE2-02 Motor Rated SlipMotor Rated Slip E4-07 Motor 2 Rated OutputMotor 2 Rated KWE2-03 Motor No-load CurrentNo-load Current L2-02 Momentary Power Loss Ride-thru TimePwrL Ridethru tE2-05 Motor Line-to-Line ResistanceTerm Resistance L2-03 Momentary Power Loss Minimum Base Block TimePwrL Baseblock tE2-06 Motor Leakage InductanceLeakage Inductance L2-04 Momentary Power Loss Voltage Recovery Ramp TimePwrL V/F Ramp tE2-10 Motor Iron Loss for Torque CompensationTcomp Iron Loss L8-02 Overheat Pre-Alarm LevelOH Pre-Alarm LvlE2-11 Motor Rated OutputMotor Rated KW o2-04 Drive/kVA SelectionInverter Model #E4-01 Motor 2 Rated CurrentMotor Rated FLA - -